Product Description:

The MAF100B-0100-FQ-S0-BH0-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Intended for closed-loop speed control on production lines, it converts electrical energy into rotation for conveyors, presses, and auxiliary axes that require consistent torque in a compact motor package. When integrated with Rexroth drive controllers, the unit supports accurate positioning, and its internal layout allows installation in tightly sealed cabinets while keeping operating temperature within acceptable limits.

At its 1000 rpm rated speed, the motor delivers nominal output without derating, making it suitable for slow, high-inertia loads. Heat is removed through liquid cooling, and the housing includes a 1/4-inch connection thread that mates with standard fittings for closed-loop coolant circuits. The housing carries an IP65 protection class, so dust and low-pressure water jets do not affect the internal windings or the standard bearing set. The windings use F-class insulation, allowing temperatures up to 155 °C before thermal limits are reached. Electrical power is supplied through a connector on side B, and winding code 0100 sets the motor’s impedance profile.

The motor uses flange mounting, matching the pilot diameter for frame size 100, so the unit bolts directly to gearboxes or machine plates. Operation is allowed in ambient temperatures from 0 to 40 °C, and overall oscillation stays within level A, which helps reduce dynamic forces on couplings. A plain shaft transmits torque without keyways, and because no shaft sealing ring is fitted, external sealing must be provided when the drive is exposed to lubricants. The motor uses a B-length stator to support axial loads while keeping the package length compact. Vibration behavior and balancing comply with DIN EN 60034-14, and the absence of a holding brake means static holding torque must come from the drive controller or an external clamp.