MAD225C-0150-SA-S2-KQ0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323357
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD225C-0150-SA-S2-KQ0-35-V1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD225C-0150-SA-S2-KQ0-35-V1 asynchronous housing motor offered by Bosch Rexroth can be installed only horizontally. This motor is free of any holding brake to support its operation. The product cannot be fitted with couplings on its output shaft. This device supports a circumferential radial force of 120 N. The unit should not be used when the operating conditions do not meet the ambient conditions set by the manufacturer. Its bearings tend to fail due to a reduction in grease lifetime. This motor is balanced dynamically according to EN 60034-14 specifications. The product has a vibration speed of 1.2 mm/s. The device is CE Certified and cUL Recognized. This unit and its components tend to get damaged because of improperly executed high-voltage tests. It is intended to be operated by taking care to ensure that the permissible force limits are not exceeded. This motor may cause property damage or personnel injury because of improper handling.
The product portrays a 2K11 transportation class. This device is designed using environment-friendly materials. The unit must be run at 800 rpm to 1000 rpm speed without load if the storage period exceeds a year. Its safety-related guidelines must be followed during its installation.This motor is attached safely to the machine by using washers and hexagon or pan head screws that adhere to DIN ISO specifications. The product pickup action should not be done using its output shaft. This device features mounting holes with a diameter of 18 mm. The unit should be connected to the machine by observing the tightening torques. It must be taken care not to strike the shaft end. This asynchronous housing motor has no additional ground conductor.
