MAD225C-0100-SA-S2-KQ0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911322413
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD225C-0100-SA-S2-KQ0-35-V1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD225C-0100-SA-S2-KQ0-35-V1 asynchronous housing motor must be protected against dust and dirt during transport. This motor needs a replacement of the encoder and bearings after a storage period of more than five years. The product may cause a risk of injury because of live parts. This device is attached to the machine using washers and hexagon or pan head screws that comply with DIN EN ISO specifications. The unit must be fitted to the machine using foot mounting only after ensuring that the center lines of the connection shaft and output shaft are aligned with each other. It has four mounting holes and four mounting feet for attachment.
This motor must be mechanically assembled before establishing the electrical connection. The product comes with a removable protective sleeve on its output shaft. This device has no additional ground conductor connection. The unit must not be operated in a damaged state. Its fan must be activated and checked for proper functioning before it is put to use. This motor must be shut down only after switching off the protection switch of the fan. The product can be used when high radial forces have to be absorbed. This device is balanced dynamically as per EN 60034-14 requirements. The unit must be operated with at least a 2 kN radial load. Its bearings have a maximum service life of 25,000 operating hours.
This motor supports a vibration speed of 1.2 mm/s. The product is designed to meet the UKCA requirements. The device must at no time be used in potentially explosive areas. This unit is supported by a mounting flange that is designed according to DIN 42955 specifications. It should be replaced with a motor of an identical type. This asynchronous housing motor should be free of salt mist on its surface.
