MAD225C-0100-SA-S2-GG0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911338396
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD225C-0100-SA-S2-GG0-35-V1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD225C-0100-SA-S2-GG0-35-V1 Bosch Rexroth asynchronous motor is tested for operational safety and reliability. This motor incorporates thermistors for protection against overload. The product features its power cable connection on its terminal box present on the housing. This device comes with a terminal box fitted in the outgoing direction determined by the user. The unit depicts IP 65 degree of protection. It should neither be disconnected nor opened in the pressurized state. This motor has a size code of 225. The product has a tightening torque of 9Nm with +/-10% tolerance for tightening its adapter plate to the terminal box. This device’s associated wires must be connected only as per the connection diagram.
The motor uses an RGS1004 flange socket for its encoder connection. This unit features the permanent integration of two temperature sensors in its windings. Its cooling fan operates independently of the drive controller. The product is associated with an electric fusing and a protective switch as determined by the machine manufacturer. This device is not intended to be used for residential applications. The unit is meant to be operated at a temperature between 0 °C and 40 °C. Its technical data must be multiplied by the utilization factor when any of the ambient operating conditions are exceeded. This asynchronous motor has a year’s Wake Industrial warranty.
The product features a 3K4 climatic category during operation as per DIN EN 60721-3-3 specifications. This device experiences vibrations in the form of sinewave oscillations in stationary use. The unit is characterized by a maximum allowed axial shock load of 10m/s2 for 6ms. It may have short-term damage due to forces because of incorrect installation with flange assembly. This motor supports an additional paint coating of thickness up to 40µm. The product is cooled by guided air currents across its surface through air baffles. This asynchronous motor delivery is done to any destination.
