MAD180D-0200-SA-S2-FQ0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911330971
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD180D-0200-SA-S2-FQ0-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD180D-0200-SA-S2-FQ0-35-N1 is a series of asynchronous motors that can be run at a rated speed of 2000 rpm and a maximum speed of 6000 rpm with standard bearings. The rated speed is the maximum speed of the motor to operate under normal load conditions without any issues. The key speed is 1500 rpm and the difference between key speed and rated speed is due to the derating. The continuous torque at the standstill of the MAD180D-0200-SA-S2-FQ0-35-N1 is 350 Nm and the continuous current at the standstill is 132.6 amperes. The maximum output of the machine is 62.8 kW and the maximum current that can be drawn from this variant is 117.4 amperes.
The authorized transport temperature range is from -20 degrees C to +80 degrees C, whereas the authorized storage temperature range is 0 degrees C to +45 degrees C. Indramat Rexroth suggests that after storage of 1 - 5 years, the motor must warm up for one hour at 1000 rpm before starting normally. The winding code of the motor is 0200, and the mounting style is flange and foot. It has an F insulation class and IP 65 motor protection. The motor-driven shaft is balanced with a full key and comes without the shaft sealing ring. The MAD180D-0200-SA-S2-FQ0-35-N1 has a thermal time constant of 70 minutes.
The total weight of the machine is 403 kg and it comes without the holding brake. The power is connected at the terminal box connection through side A, and the minimum power cross-section area for the motor is 35 mm2. The moment of inertia of MAD180D-0200-SA-S2-FQ0-35-N1 is 0.594 kgm2. The maximum torque is 768 Nm, whereas the maximum current and maximum output are 269.7 amperes and 128.7 kW respectively. After 5 years, it is recommended to replace the bearing grease.
