MAD180D-0200-SA-M2-FF0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911330674
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD180D-0200-SA-M2-FF0-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
If you don't want to compromise on the performance or the lifespan of the motor, Rexroth Bosch Group's motors are something you should look upon. MAD180D-0200-SA-M2-FF0-35-N1 is one of their asynchronous, induction motors that can be used in machine tools, printing, and paper processing machines, metal-forming machines tools, and packaging and foodstuff machines.
The motor is equipped with standard bearings and a multiturn absolute encoder with 2048 increments. Moreover, it has axial fans and a connector from where an electrical connection can be established. It offers multiple installation options due to the presence of both, foot and flange mounting. Its rotor rotates at a key speed of 1500 rpm and a rated speed of 200 rpm but the speed can be increased to 6000 rpm as well due to the presence of standard bearings. The motor is capable of delivering 350 Nm of torque upon consuming 132.6 A of current even when it is not functioning whereas when in operation, the rated torque value is 300 Nm and the rated current value is 117.4 Nm. But, these both can be increased to the maximum torque of 768 Nm and maximum current of 269.7 A.
The discharge capacity of the motor is 38 nF and the thermal time constant is 70 minutes. However, the duty cycle time and number of pole pairs are 10 minutes and 2 respectively. To ensure proepr motor function, avoid operating it when the ambient temperature is below 0 degrees C and above 40 degrees C as it can pose a negative effect on the motors lifespan. Additionally, the cross-section of the power wire is 38 mm2 and the moment of inertia of the rotor is 0.594 kgm2. At 20 degrees C, the torque constant is 2.92 Nm/A and IP 65 is the motor protection class.
