MAD180C-0200-SA-M0-KH2-35-N1

Product Description:

The MAD180C-0200-SA-M0-KH2-35-N1 is a versatile asynchronous servomotor designed by Bosch Indramat under the MAD/MAF series. Featuring an axially blowing fan, this servo motor has good heat dissipation characteristics, allowing it to perform well even in the harshest environmental conditions. During operation, the MAD180C-0200-SA-M0-KH2-35-N1 utilizes a built-in multiturn encoder for monitoring shaft position, speed, or torque. To implement closed-loop control of the shaft parameters during operation, an external digital control drive, preferably from Rexroth’s IndraDyn series, must be used. Aside from its accurate encoder, this servo motor also employs an electrically released holding brake that can withstand a rated torque of up to 240 Nm.

Assuming rated voltage, the MAD180C-0200-SA-M0-KH2-35-N1 achieves a shaft velocity of 2000 rpm. At this speed, the torque delivered by the shaft reaches an average value of around 250 Nm. The corresponding output power delivered by the shaft to the mechanical load reaches somewhere around 52.4 kilowatts at nameplate operating conditions. Without a shaft key, this large AC motor does not have a key speed or derating velocity. Whenever this servo motor operates at the nameplate power and speed, the winding draws a nominal current of 104.6 amperes. Compared to other MAD motors by Rexroth Bosch, the MAD180C-0200-SA-M0-KH2-35-N1 has a slightly higher rotor moment of inertia of 0.458 kg(m^2).

Without considering the built-in holding brake, the MAD180C-0200-SA-M0-KH2-35-N1 weighs around 334 kilograms. Like other MAD motors, this servo motor supports both flange and foot mounting methods. At most, this three-phase AC machine can withstand a maximum hotspot of 155 degrees Celsius. During operation, however, the recommended ambient temperature range must not exceed 0 to 40 degrees Celsius. Wake Industrial provides a one-year warranty alongside this servo motor upon purchase.