Product Description:

The MAD180C-0150-SA-S0-KG0-35-N1 servo motor is produced by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. It serves as a rotary actuator in industrial automation lines, converting inverter output into precisely controlled mechanical motion for indexing tables, gantries, and processing equipment. The unit combines standard bearings with a smooth shaft that includes a shaft seal, enabling direct coupling to gearboxes or driven loads while helping keep contaminants out of the housing.

Its rated speed is 1500 rpm, which is the synchronous operating point that the matching drive controller can command under nominal load. To remove heat generated at this speed, the motor uses an axial fan that forces air along the housing and helps keep winding temperature within the limits of insulation class F. Environmental ingress is limited by the IP65 enclosure, so dust and water jets are kept away from internal components during washdown cycles. Rotor position feedback is delivered by a single-turn absolute encoder with 512 periods, allowing the control loop to recover the exact angle after power is restored within one revolution. The frame size is 180, which gives the motor a stator diameter suited to mid-range torque requirements in packaging and material-handling cells.

The motor uses flange and foot mounting, so it can be fastened either to a base plate or directly to a machine wall. Its overall length follows frame category C, which adds stack depth without changing the external diameter. Because the design is without a holding brake, vertical axes must be secured by mechanical clamping or drive torque when power is off. Continuous service is permitted within an ambient range of 0 to 40 °C, and service leads exit on the B-side through a sealed terminal box. The motor is balanced to vibration grade R for normal industrial duty.