MAD160C-0200-SA-M2-KP0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309292
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD160C-0200-SA-M2-KP0-35-N1 is an AC synchronous servo motor produced by Bosch Rexroth Indramat. This motor is part of the MAD IndraDyn A Motors series and features a frame size of 160 with a rated power of 20 kW. It operates at 2000 rpm and uses a multi-turn absolute encoder type. The motor has an IP65 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD160C-0200-SA-M2-KP0-35-N1 is a MAD series servo motor. It is produced by Bosch Rexroth. Applications of the motor include paper-processing machines, food-processing machines, and machine tools. Its protection category is IP65. This rating indicates robust protection from solids and liquids present in the operating environment. This robust motor can be deployed and used in adverse operating environments. Only accessories specified by Bosch in the product documentation should be used with the motor. Changes to motor hardware and firmware are not allowed. The motor must be used in configurations explicitly specified in the product documentation. The motor controller must be configured prior to system startup. The motor is extensively tested at its production facility. Therefore, operators don’t need to test the motor. Any high-voltage tests conducted on the motor by the operator can damage it.
To identify the motor, please refer to the name plate on the housing. The serial number and type code allow unique identification of each Bosch product. An axial fan on the MAD160C-0200-SA-M2-KP0-35-N1 motor provides effective cooling. A multiturn absolute encoder with EnDat 2.1 interface provides real-time digital feedback for precise motor control. The motor shaft includes a key and a sealing ring. A full key is used for shaft balancing. The MAD160C-0200-SA-M2-KP0-35-N1 motor is without a holding brake. Both foot and flange mounting are possible. Weight of the motor is approximately 238 kilograms. Power wires with a minimum 25 mm2 cross-section are required for delivering power to the motor. The flange size is 316 millimeters. Diameter and length of the shaft are 55 millimeters and 95 millimeters. Approximate length of the motor is 838 millimeters. The motor must be handled by trained professionals.
Frequently Asked Questions about MAD160C-0200-SA-M2-KP0-35-N1:
Q: Is a holding brake installed on the motor?
A: The motor is without a holding brake.
Q: What is the minimum power cable size?
A: The minimum power cable size is 25 mm2.
Q: What is the motor insulation class?
A: The insulation class is 155 as per DIN EN 60034-1.
Q: What is the peak motor speed?
A: The peak motor speed is 6000 RPM.
Q: What is the thermal time constant?
A: Thermal time constant of the motor is 15 minutes.
