MAD160C-0200-SA-M2-BQ5-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911327749
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD160C-0200-SA-M2-BQ5-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
With MAD160C-0200-SA-M2-BQ5-35-N1 users can run high-torque gearboxes present in large industrial machines provided the much-needed torque. This servo motor can provide a nominal torque of up to 210 Nm which is the highest in the 160C series of the MAD series servo motors. The motor has a centering diameter of 160 mm which makes this motor compact in size and it weighs 233 kg making this motor rigid and heavy-duty when it comes to the overall design.
To help with the cooling, the MAD160C-0200-SA-M2-BQ5-35-N1 servo motor comes with an Axial blower fan which is inside the motor's enclosure. The air flows parallel to the rotor shaft in a linear manner. This increases the flow rate and can gush in and out huge volumes of air. The average flow rate of this motor is 1000 m^3 per hour helping cool this motor at a quicker pace. This motor has a noise level of 70 dB which is quieter for an industrial motor with an axial blower. It is always recommended to install this servo motor in an environment with an Ambient temperature between 0 to 45 degrees Celsius for optimum performance.
To help move the motor shaft accurately, the MAD160C-0200-SA-M2-BQ5-35-N1 servo motor comes with an M2 configuration of digital encoder which is capable of counting steps as well as number of rotations. The servo has a resolution of 2048 steps which helps the motor shaft be more precise when it comes to positioning the shaft in an application that requires zero to minimum error, such as robotics. The encoder of this motor uses the EnDat 2.1 digital communication protocol with the master control module and relies on CRC data check for error detection.
