MAD160C-0200-SA-M0-AP1-05-N1

Product Description:

MAD160C-0200-SA-M0-AP1-05-N1 is a MAD series asynchronous servo motor from Bosch Rexroth. As per the type code, the motor frame size is 200, it is equipped with an axial cooling fan, a multiturn absolute encoder with 512 increments provides feedback, the main electrical connection is on side A, the motor shaft features a key and sealing ring, and the motor is designed for flange mounting. Standard bearings are used on the servo motor and can handle vibration severity grade R. Rated torque output of the MAD160C-0200-SA-M0-AP1-05-N1 motor is 210 Nm. Its speed rating is 2000 RPM and the maximum speed is 6000 RPM. The motor delivers 44 kilowatts rated power output. The rated current output is 93.9 Amps. Continuous torque output of the motor and current at standstill are 225 Nm and 100 Amps.

Torque constant of the MAD160C-0200-SA-M0-AP1-05-N1 servo motor is 2.63 Nm/A at 20 degrees Celsius. Bosch recommends using power cables with minimum 25 mm2 cross-sectional area. The motor windings have 2 pole pairs. Moment of inertia of the motor rotor is 0.311 kg m2. Weight of the servo motor is approximately 233 kilograms. The thermal time constant is 70 minutes. During operation, the sound level produced by the motor is approximately 75 db(A) with 3 dB tolerance. The permissible temperature for motor operation is 0 to 40 degrees Celsius and the storage temperature is -20 to 80 degrees Celsius. Insulation on the motor complies with class F as per DIN VDE 0530-1. With IP65 class protection, the motor is safe from dust ingress. It is also safe from low-pressure liquid jets. Holding brake installed on the motor delivers 240 Nm transmittable torque and its connection voltage is 24 Volts DC.