Product Description:

The MAD160C-0200-SA-C0-BG0-35-N3 is a servo motor produced by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. It converts drive-controller output into precise rotary motion for positioning or continuous-duty axes in automated machinery such as presses, extruders, and material-handling stations. Standard bearings and a sealed housing allow the motor to carry radial and axial loads encountered in these installations while maintaining alignment during operation. The unit is intended for industrial motion systems that require repeatable shaft movement and stable torque delivery over extended run times.

The motor is rated for a continuous mechanical speed of 2000 rpm, allowing machines to maintain moderate throughput without overspeeding the rotor. An internal axial fan directs airflow along the stator windings, which helps limit thermal rise during extended duty cycles. The housing has an IP65 rating that helps keep dust and low-pressure water jets away from live parts when the motor is installed on open machine frames. Installation flexibility comes from flange and foot mounting, allowing either face or base attachment to a machine bed. Ambient operation is permitted from 0–40 °C, which provides the normal temperature range for regular service.

Electrically, the windings use insulation class F, providing thermal endurance suited to the motor’s cooling method. A smooth shaft with a shaft seal supports power transmission while helping keep lubricant in place and contaminants out of the shaft area. Dynamic behavior is qualified to vibration grade S1, which supports operation near sensitive feedback devices with controlled mechanical vibration. The frame size of 160 mm is matched with winding code 0200 to provide a balance between torque density and current demand, and the connector is positioned on the B-side for compact cable routing. Because the motor is supplied without a holding brake, power-off holding must be provided by an external mechanical lock or by drive torque.