MAD160C-0150-SA-S2-BP0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911317483
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MAD160C-0150-SA-S2-BP0-05-N1 motor offers a rated power of 15.0 kW, a rated torque of 95 Nm, a shaft diameter of 42 mm, and features IP54 protection. Designed as part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it is self-cooled and complies with IEC 60034 standards.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Engineered by the popular Bosch Rexroth Indramat manufacturer, the MAD160C-0150-SA-S2-BP0-05-N1 asynchronous servomotor has a resistance of 577 Ohms at 25 °C for its temperature monitoring sensor. This motor showcases an optimized design. The product should not undergo constructional modifications. This device’s operation must not be executed in either a damaged or a defective state. The unit is used in machine tools for automation purposes. Its connected drive controller should be programmed before its startup. This motor may produce an electric shock when it is utilized improperly.
The product use and operation must be done by only trained personnel. This device triggers a high voltage due to an incorrect connection. The unit’s equipment grounding conductor must be properly connected before it is turned on. Its vertical axis should be prevented from falling after it is switched off. This motor’s rotor is equipped with permanent magnets. The product can cause injuries if some of its parts are handled improperly in unfavorable conditions. This device’s mounting and transport must be done using suitable equipment. The unit’s maximum output power is based on the power supply and the drive controller used. Its maximum current is specified as a root-mean-square value.
This motor’s maximum permitted operating temperature is 55 °C. The product’s application limits must not exceed the lowered motor data if the setup height or ambient temperature exceeds the maximum limits. This device’s ambient climatic conditions are defined as per EN 60721-3-3 specifications. The unit depicts sine-shaped vibrations in stationary use. It encounters a 0.3 mm amplitude in the axial direction between a frequency of 0 Hz to 55 Hz. This asynchronous servomotor’s shock stress is determined by its maximum allowed acceleration in non-stationary use.
Frequently Asked Questions about MAD160C-0150-SA-S2-BP0-05-N1:
Q: What interface does the encoder of the MAD160C-0150-SA-S2-BP0-05-N1 motor have?
A: The encoder of the MAD160C-0150-SA-S2-BP0-05-N1 motor has an EnDat 2.1 interface.
Q: Can the MAD160C-0150-SA-S2-BP0-05-N1 motor be operated on a standalone basis?
A: No, the MAD160C-0150-SA-S2-BP0-05-N1 motor cannot be operated on a standalone basis and is meant to be used with an IndraDrive drive controller.
Q: How does the cooling of the MAD160C-0150-SA-S2-BP0-05-N1 motor take place?
A: The cooling of the MAD160C-0150-SA-S2-BP0-05-N1 motor takes place through surface cooling by using an axial fan.
Q: What shaft does the MAD160C-0150-SA-S2-BP0-05-N1 motor have?
A: The MAD160C-0150-SA-S2-BP0-05-N1 motor has a keyway shaft with a shaft sealing ring.
Q: What direction is the connector of the MAD160C-0150-SA-S2-BP0-05-N1 motor directed to?
A: The connector of the MAD160C-0150-SA-S2-BP0-05-N1 motor is directed to Side B.
