MAD160C-0150-SA-M2-BP0-05-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310253
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD160C-0150-SA-M2-BP0-05-V1 is a self-cooled AC servo motor with a 160 mm frame size and rated power of 15 kW. Manufactured by Bosch Rexroth Indramat, it belongs to the MAD IndraDyn A Motors series. It features an IP65 enclosure, single-turn absolute encoder, and operates at 400 V AC.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD160C-0150-SA-M2-BP0-05-V1 is an industrial-grade IndraDyn motor that delivers high torque density, reliable cooling, and high mechanical strength for challenging automation applications. This motor employs an axial fan with a blowing configuration for its cooling mechanism. Its active cooling mode provides superior thermal control to operate within consistent temperatures in applications of continuous duty.
The operating ambient air temperature of the MAD160C-0150-SA-M2-BP0-05-V1 motor is between 0 and 40 degrees Celsius for stable performance under normal industrial conditions without threat of overheating or thermal shutdown. This motor’s shaft, along with a shaft sealing ring, is designed to be durable and resistant to contamination. The shaft of this motor is also balanced with the whole key to provide better dynamic stability and less vibration when operating at high speed. The reinforced bearing type of this motor provides additional mechanical endurance and lowers load stress to enable prolonged usage under axial and radial forces. The torque constant of this motor at 20 °C is 3.36 Nm/A for providing maximum torque output per ampere in controlled temperature conditions.
This motor provides a rated output of 33.8 kW, with a peak power of 69.29 kW. This wide power range provides both steady-state operation as well as short, high-load demands without affecting system performance. This motor has 2 pole pairs, with a rated speed of 1500 1/min, designed for applications demanding constant speed control and load response. The MAD160C-0150-SA-M2-BP0-05-V1 motor features a flange mounting design, which facilitates mechanical integration and secure fixture in machine assemblies. This motor requires stable base mounting with a total weight of 238 kg, and its discharge capacity is 27.2 nF to provide better electrical insulation and voltage surge resistance.
Frequently Asked Questions about MAD160C-0150-SA-M2-BP0-05-V1:
Q: How does the 27.2 nF discharge capacity benefit the motor?
A: It enhances insulation properties and reduces voltage stress across windings. This protects the internal circuitry from potential electrical faults.
Q: Why is the shaft balanced with the entire key in MAD160C-0150-SA-M2-BP0-05-V1?
A: This design minimizes unbalanced loads during rotation. It ensures smoother operation and reduces bearing wear.
Q: What role does the reinforced bearing play in long-term operation?
A: Reinforced bearings support higher axial and radial loads. They also extend service intervals and minimize failure under dynamic conditions.
Q: Why is a torque constant of 3.36 Nm/A advantageous in MAD160C-0150-SA-M2-BP0-05-V1?
A: It ensures high torque output with lower current draw. This increases motor efficiency and reduces thermal strain.
Q: What does a 0.3110000 kgm² rotor inertia imply in application?
A: It allows controlled acceleration and deceleration. Ideal for systems needing precise speed control and minimal overshoot.
