MAD160B-0200-SA-M0-BP0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310106
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD160B-0200-SA-M0-BP0-35-N1 is a robust AC synchronous servo motor with a rated power of 20 kW and a rated torque of 130 Nm. Manufactured by Bosch Rexroth Indramat as part of the MAD IndraDyn A Motors series, it features a frame size of 160 and uses surface air cooling. It delivers IP65 protection and a maximum speed of 3000 rpm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD160B-0200-SA-M0-BP0-35-N1 Servo motor is designed by Bosch Rexroth. It provides the precise and controlled motion required in industrial automation. The motor draws a rated current of 75.8 A in standard use. The continuous standstill current is around 80.9 A. The maximum current during peak conditions reaches up to 157.4 A.
The MAD160B-0200-SA-M0-BP0-35-N1 servo motor features a rated speed of 2,000 rpm with a key speed of 1,500 rpm. The rated torque of this motor is 160 Nm under nominal conditions. It delivers 170 Nm continuous torque when held at a standstill. The rotor moment of inertia is specified at 0.2500 kg·m². Its rated power is defined at 35.5 kW for steady operation. The maximum achievable power output reaches up to 68.68 kW. The maximum torque produced by the unit is 375.3 Nm under load. This Bosch Servo motor includes a torque constant of 2.54 Nm/A. The discharge capacity is rated at 34.4 nF for this MAD160B-0200-SA-M0-BP0-35-N1 servo motor. A thermal time constant of 35 minutes supports heat management. Cycle duration is defined at 10 minutes at 44% duty (S6). The sound pressure level is noted at 75 dB(A) with ±3 tolerance. The servo motor weighs a total of 201 kg. The maximum supported speed using bearing type H is 8,000 rpm. The motor operates with two pole pairs for consistent rotation. Power wiring should use a 25 mm² cross-sectional area.
The encoder connector of MAD160B-0200-SA-M0-BP0-35-N1 servo motor uses a 17-pin RGS1004 with shielding. Cable entries include M32x1.5 and M40x1.5 thread sizes. The terminal connection range spans from 1.5 mm² to 35 mm². The terminal box fitted is an RLK1300 model. PE terminal supports an M8 ring-type connection. Lid tightening torque is 6.5 Nm with ±10% tolerance.
Frequently Asked Questions about MAD160B-0200-SA-M0-BP0-35-N1:
Q: How does the 2-pole pair configuration benefit the MAD160B-0200-SA-M0-BP0-35-N1 servo motor?
A: The 2-pole pair configuration ensures stable and synchronized motor operation. It provides smoother torque delivery for precise automation tasks.
Q: What role does the RLK1300 terminal box play in the MAD160B-0200-SA-M0-BP0-35-N1 servo motor?
A: The RLK1300 terminal box provides robust housing for electrical connections. It enhances safety and ease of access during motor integration.
Q: Why is the rotor moment of inertia of 0.2500 kg·m² important in the MAD160B-0200-SA-M0-BP0-35-N1 motor?
A: A lower rotor moment of inertia improves acceleration and deceleration response. This supports rapid changes in motion and increased control accuracy.
Q: How does the discharge capacity of 34.4 nF enhance the MAD160B-0200-SA-M0-BP0-35-N1 motor's performance?
A: The discharge capacity aids in controlling electrical noise and disturbances. It ensures smoother signal integrity during high-speed operation.
Q: What is the advantage of using a 17-pin RGS1004 encoder connector in the MAD160B-0200-SA-M0-BP0-35-N1?
A: The 17-pin RGS1004 connector offers precise encoder feedback. It facilitates accurate position tracking and motor synchronization.
