MAD160B-0150-SA-S2-KP0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911322428
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD160B-0150-SA-S2-KP0-35-V1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD160B-0150-SA-S2-KP0-35-V1 asynchronous housing motor produced by Bosch Rexroth comes with an extra roller bearing fitting on its output side. This motor features a maximum allowed radial force based on the design of the output shaft and force action point. The product is not meant to be operated in extremely soiled environments. This device is delivered with a single-turn absolute encoder. The unit should always be operated in its original state. Its fan works on the blowing principle.
This motor must not be directly connected to a mains power supply with a 50/60 Hz frequency. The product can be installed only in the horizontal orientation. This device can be used only with compatible drive controllers that have variable output frequency and voltage. The unit is supposed to be connected using the manufacturer's readymade cables. It comes equipped with a labyrinth seal. This motor supports radial forces only perpendicular to the mounting surface. The product has an IP 65 protection rating for the output shaft. This device can withstand only low axial forces. The unit must be operated at a minimum speed of 200 rpm. Its drain hole should be positioned such that it is below the output shaft.
This motor has reduced grease service life for its bearings. The product should be put to use with at least 1.5 kN radial load. This unit should be coordinated carefully with the machine construction to avoid exceeding the specified load limits. It must be taken care to ensure that there is no impact on the output shaft. This asynchronous housing motor has a continuous torque in standstill mode to support S1 operating mode before achieving the key speed.
