MAD160B-0150-SA-S2-BQ0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311983
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAD160B-0150-SA-S2-BQ0-35-V1 belongs to the MAD IndraDyn A Motors series and features natural cooling (SA). The servo motor delivers a rated power of 15 kW, a rated torque of 95 Nm, and can achieve a peak torque of 260 Nm. It operates with a rated voltage of 400V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD160B-0150-SA-S2-BQ0-35-V1 Servo motor is designed for industrial automation by Bosch Indramat. This motor uses an IEC standard flange for mounting. The shaft is keyed and fitted with a sealing ring. Bearings are lifetime-lubricated and handle axial and radial loads. The cooling is done through the motor housing via surface cooling.
The MAD160B-0150-SA-S2-BQ0-35-V1 servo motor features an integrated thermal sensor for temperature monitoring. The sensor may be PTC or KTY, depending on the configuration. The servo motor protection class is rated at IP65. It must be used under 40 °C. The rated torque output of the motor is specified at 190.0 Nm. The maximum torque capacity is specified at 440.1 Nm. The rated motor power of the motor is 29.86 kW. The maximum achievable motor power reaches up to 61.20 kilowatts. The rated current of MAD160B-0150-SA-S2-BQ0-35-V1 servo motor for operation is 61.6 A. The maximum continuous current allowed is 132.2 A. Standard operating speed is set at 1500 revolutions per minute. The Servomotor allows maximum speed up to 6000 rpm with H/N/V bearings. The thermal time constant of the motor is rated at 35.0 minutes. The encoder installed is of S2 Hiperface 1 Vpp type. Encoder resolution is 128 increments per revolution, interpolated by the drive.
The discharge capacity of the MAD160B-0150-SA-S2-BQ0-35-V1 servo motor component is 34.4 nF. The rotor moment of inertia is listed as 0.2500000 kgm². The mass of the servomotor is specified at 201.0 kg. The power connection requires a 16.0 mm² wire cross-section. This servomotor has Class 155 insulation. It complies with DIN EN 60034-1 insulation standards. The SPL (sound pressure level) is rated at 75 dB(A) ±3. The servomotor cycle duration is rated at 10 minutes under S6 - 44% duty.
Frequently Asked Questions about MAD160B-0150-SA-S2-BQ0-35-V1:
Q: Why is the discharge capacity of 34.4 nF important in MAD160B-0150-SA-S2-BQ0-35-V1?
A: A discharge capacity of 34.4 nF aids in electromagnetic interference control. It ensures stable motor operation in electronically sensitive environments.
Q: How does surface cooling benefit MAD160B-0150-SA-S2-BQ0-35-V1 performance?
A: Surface cooling promotes heat dissipation without external cooling systems. It allows efficient temperature management for continuous duty cycles.
Q: What advantages does Class 155 insulation provide to MAD160B-0150-SA-S2-BQ0-35-V1?
A: Class 155 insulation increases thermal resistance and extends motor life. It allows reliable operation under high-temperature conditions.
Q: What role does the thermal time constant play in MAD160B-0150-SA-S2-BQ0-35-V1?
A: The thermal time constant of 35 minutes helps regulate motor cooling and overload protection. It ensures reliable operation under variable thermal loads.
Q: Why is a keyed shaft used in MAD160B-0150-SA-S2-BQ0-35-V1?
A: A keyed shaft ensures secure torque transmission between the motor and load. It prevents slippage under heavy industrial loads.
