MAD160B-0150-SA-S2-AH0-35-V1

Product Description:

MAD160B-0150-SA-S2-AH0-35-V1 is an industrial servo motor. It is part of Bosch Rexroth’s MAD motor series. Motors from this series come with a fixed cooling fan. Liquid cooled motors are also available from Bosch’s MAF series. The fan installed on the MAD160B-0150-SA-S2-AH0-35-V1 motor produces 520 m3/h mean airflow. It requires three-phase AC input at 400/480 Volts AC. At 400 Volts, the fan current can range from 0.21 to 0.28 Amps, the blocking current can range from 0.54 to 0.63 Amps, and the power consumption can range from 145.5 to 193.98 VA. At 480 Volts, the fan current can range from 0.24 to 0.26 Amps, the blocking current can range from 0.68 to 0.73 Amps, and the power consumption can range from 199.5 to 216.16 VA. Different shaft designs are available for MAD motors.

The main shaft on the MAD160B-0150-SA-S2-AH0-35-V1 motor is plain and does not include a shaft seal. The motor gets power from the motor controller via a cable that connects to the power connection on side A of the unit. A singleturn encoder provides speed and position feedback. The motor controller uses motor feedback to accurately control motor parameters. Both foot and flange mounting options are supported. Reinforced bearings improve motor performance and allow higher peak speeds. The rated torque output of the motor is 190 Nm, the peak torque is 440 Nm and the torque at standstill is 200 Nm. The rated current output of the motor is 61.6 Amps, the peak current 132.2 Amps, and the current at standstill is 64 Amps. Peak speed and nominal speed of the motor are 6000 RPM and 1500 RPM. Approximate weight of the motor is 201 kilograms.