MAD160B-0150-SA-M0-AP3-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911307330
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD160B-0150-SA-M0-AP3-35-N1 is a foot-mounted motor with surface air cooling and a rated speed of 1500 rpm. Manufactured by Bosch Rexroth Indramat as part of the MAD IndraDyn A Motors series, it delivers a rated power of 15 kW and operates at 400 V. This motor features IP54 protection and a multi-turn encoder.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD160B-0150-SA-M0-AP3-35-N1 Servo Motor is developed and manufactured by Bosch Rexroth Indramat. It is produced and specialized for industrial automation systems. It features a B-length laminated core construction. This servo motor uses surface cooling with an axial fan. The axial fan ensures stable temperature control during operation.
The MAD160B-0150-SA-M0-AP3-35-N1 servo motor supports basic feedback, suited for general applications. The power connector is a flange socket labeled AP3. The output shaft has a diameter of 35 millimeters, which is either plain or includes a keyway design. There is no holding brake is integrated into this motor variant. The torque output is measured at 215.0 Nm. It has a rated mechanical power of 36.40 kilowatts. The nominal speed of the motor is 1,500 revolutions per minute. The RMS specified current is recorded at 75.3 amperes. Its base speed is equal to the rated speed of 1,500 rpm. Its maximum torque capability reaches up to 496.4 newton-meters. The maximum power output is 69.29 kilowatts at peak load. The Maximum current supplied is 152.6 amperes. The MAD160B-0150-SA-M0-AP3-35-N1 servo motor delivers 225.0 Nm at standstill continuously. A continuous current at standstill is rated at 77.8 amperes.
The heating time constant of the MAD160B-0150-SA-M0-AP3-35-N1 servo motor for thermal rise is 15.0 minutes. Its discharge capacitance to housing measures at 27.2 nF. The power cable cross-sectional area should be 25.0 mm². The complete motor unit weighs approximately 238.0 kilograms. The Protection rating of the motor is IP65 against dust and water jets. Its insulation follows Class F standards for winding limits. The safe humidity conditions are below 90% without condensation. Installation altitude must remain under 1,000 meters elevation. Its torque constant at 20 °C is measured at 3.86 Nm/A. The rotor includes two magnetic pole pairs internally.
Frequently Asked Questions about MAD160B-0150-SA-M0-AP3-35-N1:
Q: What advantage does a torque constant of 3.86 Nm/A offer in MAD160B-0150-SA-M0-AP3-35-N1?
A: A torque constant of 3.86 Nm/A provides higher torque output per ampere. This results in efficient energy use under load conditions in MAD160B-0150-SA-M0-AP3-35-N1.
Q: How does the rotor's two magnetic pole pairs in MAD160B-0150-SA-M0-AP3-35-N1 affect its operation?
A: Two magnetic pole pairs allow smoother torque delivery and reduced cogging. This improves the motor's precision in industrial automation tasks.
Q: Why is Class F insulation important in the MAD160B-0150-SA-M0-AP3-35-N1 servo motor?
A: Class F insulation allows the motor to operate at higher winding temperatures safely. It ensures long-term durability of the MAD160B-0150-SA-M0-AP3-35-N1 under tough environments.
Q: How does the B-length laminated core in MAD160B-0150-SA-M0-AP3-35-N1 improve performance?
A: The B-length laminated core minimizes eddy current losses, improving motor efficiency. It enhances torque density in the MAD160B-0150-SA-M0-AP3-35-N1 motor.
Q: Why is surface cooling with an axial fan used in MAD160B-0150-SA-M0-AP3-35-N1?
A: Surface cooling with an axial fan ensures consistent thermal management. This design prevents overheating and maintains stable motor performance during prolonged operation.
