Product Description:

The MAD160B-0100-SA-C0-AG0-05-N1 is a servo motor manufactured by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. In automated production cells, this motor supplies controlled torque and velocity to axes that require precise positioning and repeatable cycle times. It integrates directly with IndraDrive controllers through a pre-assembled connector set. This operating style lets the drive regulate acceleration and settling behavior during repetitive machine cycles. The motor is suited for conveyors, indexing tables, and other machinery that depends on steady closed-loop motion.

The rotor reaches its nominal velocity at 1000 rpm, a speed that balances dynamic response with continuous torque capability. An internal axial fan directs airflow along the stator laminations to remove heat generated by copper losses. A cast housing rated IP65 blocks dust and low-pressure water, allowing installation outside sealed cabinets. The motor uses flange mounting for direct attachment to machine frames or gearboxes. Stable thermal performance is maintained within an ambient range of 0–40 °C. It has standard bearings, a single-cable connector, winding code 0100, and vibration grade R balancing. That arrangement simplifies cabling at the motor connection point.

The motor uses insulation class F, permitting winding temperatures up to 155 °C under intermittent overloads. A smooth shaft with a shaft seal helps prevent lubricant leakage and resists fluid ingress. Its frame size 160 with a B-length stator gives a moderate inertia profile suited to mid-range load envelopes. All power and feedback terminations exit on the A-side, helping keep cable routing compact. Because the unit is supplied without a holding brake, any vertical or overhung load must be secured by an external locking mechanism or maintained through drive torque during power loss.