MAD130D-0250-SA-S0-AG0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309671
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130D-0250-SA-S0-AG0-05-N1 motor offers a frame size of 130 mm, a rated power of 2.5 kW, a rated torque of 8 Nm, and natural cooling. Part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it features IP65 protection and operates with a peak speed of 4500 rpm for reliable performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Rexroth Indramat manufactures the MAD130D-0250-SA-S0-AG0-05-N1 as a synchronous motor from IndraDyn line of products. It has a built-in I²C interface technology with a single rotation absolute encoder that operated on 8 V and generates a sinusoidal signal of 1 Vss as output. The motor is 130 mm in size and supports a flange mounting installation.
The MAD130D-0250-SA-S0-AG0-05-N1 motor is design with a smooth shaft that has an embedded sealing ring for protection against dirt and water. Its sound pressure level is 7 (B), measured at a 1-meter distance. The motor has a rotor inertia of 0.164 kg·m² and it provides 120 Nm of torque normally. The rated power usage is 31.4 kW along with a maximum power consumption of 64.4 kW and this MAD130D motor draws 123.4 A of current under full load scenarios. At a temperature of 20°C, the current serving as input results in an output torque of 2.69 Nm. It is necessary to use a 25 mm² cable to ensure safe delivery of power. The MAD130D motor gets cooled by an axial ventilator fan that is configured in blowing mode. The fan works with 3×400V ±15%/3×480V ±10%, using 50/60 Hz while it takes between 139-208 VA of electric power and draws 0.20-0.25 A to push 1000 m³/h of air on average through the motor.
The MAD130D-0250-SA-S0-AG0-05-N1 motor has rated speed of 2500 rounds/min, a key speed 2000 rounds/min and it is capable of achieving a peak spin of 7500 rounds/min with its standard greased bearings. The peak torque that the motor can provide is 310 Nm and the value of continuous standstill current is 75.4 A. The MAD130D motor has a 10-minute of duty cycle in S6 operating mode and its discharge capacity is measured at 26.4 nF.
Frequently Asked Questions about MAD130D-0250-SA-S0-AG0-05-N1:
Q: How does the sinusoidal 1 Vss signal benefit encoder performance?
A: The 1 Vss sinusoidal output allows precise interpolation and noise-resistant signal transmission, enhancing positioning accuracy in automation systems.
Q: Why is an I²C interface integrated into the MAD130D-0250-SA-S0-AG0-05-N1 motor?
A: The I²C interface enables simple and efficient two-wire communication with controllers, minimizing wiring complexity and improving real-time data exchange.
Q: What role does the embedded sealing ring in the MAD130D-0250-SA-S0-AG0-05-N1 motor’s shaft play?
A: The sealing ring provides protection against dust and moisture ingress, helping extend bearing and motor life in harsh industrial environments.
Q: Why does the MAD130D-0250-SA-S0-AG0-05-N1 motor require a 25 mm² cable?
A: A 25 mm² cable ensures safe and efficient power transmission under full load, minimizing voltage drop and heat buildup.
Q: How does the axial ventilator fan in the MAD130D-0250-SA-S0-AG0-05-N1 improve thermal management?
A: The fan in blowing mode circulates 1000 m³/h of air, effectively removing heat from the motor to prevent thermal overload during peak operation.
