Product Description:

The MAD130D-0200-SA-S0-AH0-05-N2 is a servo motor manufactured by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. It converts command signals from a drive controller into controlled rotation for positioning and speed regulation in automated equipment. A standard bearing set supports the rotor during continuous motion, and the motor is supplied without a holding brake, so any stationary load must be held by drive torque or an external mechanical lock. This arrangement is suitable for machines that do not rely on an internal brake for load retention at standstill.

The motor’s rated speed is 2000 rpm, which is the continuous operating speed under nominal winding conditions. An integrated axial fan moves air along the housing to remove winding losses and support stable operation in ambient temperatures from 0 to 40 °C. The motor has an IP65 rating that helps protect internal parts from dust and water jets. Rotor position is provided by a single-turn absolute encoder with 512 periods per revolution, so position information is available after power-up without a separate homing cycle. Electrical isolation uses F-class insulation, which supports winding temperatures consistent with that thermal class. Power and feedback connect through a plug-in connector, and the motor is balanced to vibration grade S for smooth running.

The motor uses a smooth shaft without a shaft seal, which is suitable where sealing is handled elsewhere in the machine. It is prepared for flange mounting, and the 130 frame with D length gives the housing a longer format that can suit applications needing higher rotor inertia. All connectors face the A-side, which keeps cable routing in one direction and leaves the opposite end clear. Winding code 0200 indicates the electrical characteristics used with compatible IndraDrive inverters.