MAD130D-0200-SA-M2-AG0-05-R1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911325393
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130D-0200-SA-M2-AG0-05-R1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
With MAD130D-0200-SA-M2-AG0-05-R1, users can use this motor for their high torque applications as it can provide a rated torque of up to 150 Nm with a speed of 2000 rotations per minute. This motor has a power rating of 31.4 kW with a current rating of 71.3 Amperes, making this motor electrically demanding in terms of operating conditions. At standstill operating conditions, the motor has a torque rating of 155 Nm while drawing a current of up to 72.8 Amperes.
One thing that differentiates the MAD series of motors from the MAF series is the Axial blower fan the MAD series of motors has to offer. This axial blower fan helps keep the internals of the motor cool, especially the coil in the case of heat dissipation. The blower requires 400 to 480 volts AC to operate, drawing a current of up to 0.20 to 0.25 Amperes. The average flow rate of the blower fan is approximately 1000 m³ per hour, allowing the motor to cool down at a much quicker pace. The ambient temperature range of this motor is between 0 to 40 degrees Celsius while the humidity range is set between 10 to 95%.
To accurately track the shaft position, the MAD130D-0200-SA-M2-AG0-05-R1 Asynchronous motor comes with a multiturn absolute encoder. This encoder can track multiple turns and has a resolution of 2048 increments per revolution, helping increase the preciseness and accuracy of the motor positioning, making it perfect for robotics applications. The encoder relies on a closed-loop control system configuration, ensuring accurate shaft positioning by continuously minimizing the error in the control system. The encoder relies on the EnDat 2.1 digital encoder interface for communication.
