Product Description:

The MAD130D-0200-SA-M0-AK1-05-N1 is a servo motor produced by Bosch Rexroth Indramat as part of the MAD IndraDyn A Motors series. It delivers precise rotary motion for industrial automation tasks such as indexing tables, feeders, and tool spindles. Its electromechanical design supports closed-loop control of position, velocity, and torque so machinery can maintain repeatable cycles under variable load and during frequent speed changes.

At a nominal shaft velocity of 2000 rpm, the motor provides stable synchronous operation without exceeding thermal limits. Cooling is supplied by a built-in axial fan that channels air along the housing to remove winding heat. The standard bearing set supports continuous duty, while flange mounting keeps the 130 mm frame centered to driven equipment. The D-length stator section balances inertia and torque density, and power and feedback conductors exit on the A-side through a circular connector for straightforward cable routing. An electrically released brake supplies 80 Nm of static torque so vertical or overhung loads remain secure when the drive is disabled. Position data are furnished by a multiturn absolute encoder, enabling homing-free starts, and the housing is sealed to IP65 to help block dust and water jets.

The electrical system is insulated to Class F, allowing winding temperatures up to 155 °C. Acceptable ambient conditions range from 0–40 °C, matching most enclosure-mounted installations. A half-key balanced shaft with seal transmits torque while helping prevent lubricant leakage, and vibration is limited to Grade R so the motor can be mounted near sensitive equipment. Feedback resolution is fixed at 512 periods to support fine incremental control, and the 0200 winding code matches the stator characteristics to compatible IndraDrive amplifiers.