MAD130D-0150-SA-M0-AH1-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911309308
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130D-0150-SA-M0-AH1-05-N1 servo motor features a frame size of 130 mm, a rated power of 1.5 kW, a maximum torque of 28.5 Nm, and axial connectors. Part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it offers IP65 protection (excluding shaft end and connectors) and uses a self-cooled cooling method.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130D-0150-SA-M0-AH1-05-N1 is an asynchronous box motor. MAD series motors are cooled by a permanent fan unit. For liquid cooling, you can order motors from the MAF series. MAD motor housings are fully IP65 compliant. This means that dust cannot enter the housings. Water from low-pressure jets also cannot affect motor performance. MAD130D-0150-SA-M0-AH1-05-N1 is a motor with a multiturn encoder for measuring and providing feedback about motor speed and position. The location of the power connection is selectable, and this motor has a connector on side A. Different shaft designs are available, and this motor has a plain shaft without sealing ring. MAD motors require relatively less maintenance. Another benefit of these motor is that operators can perform maintenance during motor operation. For optimal performance MAD motors must be used with a Bosch motor controller.
The only mounting option is flange mounting. Dimensions of the flange are 260 millimeters. The integrated fan unit produces 350 m3/h. At 400 Volts AC, the fan draws 0.28 Amps current and consumes 197.45 VA power. Its blocking current is 0.47 Amps. At 480 Volts AC, current draw of the fan unit is 0.26 Amps current and its power consumption is 217.82 VA. Its blocking current is 0.55 Amps. Holding torque of the holding brake is 80 Nm. This brake is designed to release the shaft after the motor controller sends a 24 Volts DC release signal. The output power of the motor is 24.3 kilowatts. Its nominal torque is 155 Nm. The nominal motor speed is 1500 RPM. Its torque constant is 3.09 Nm/A at 20 degrees Celsius. The motor insulation class as per DIN EN 60034-1 is 155.
Frequently Asked Questions about MAD130D-0150-SA-M0-AH1-05-N1:
Q: What is holding torque of the brake?
A: Holding torque of the brake is 80 Nm.
Q: What is the maximum motor speed?
A: The maximum motor speed is 7500 RPM.
Q: What are the number of pole pairs?
A: The motor has 3 pole pairs.
Q: What is the operating temperature for rated output?
A: The operating temperature for rated output is 0 to 40 degrees Celsius.
Q: What is the power wire cross-section?
A: The minimum power cable size is 16 mm2.
