MAD130D-0100-SA-S2-KP0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321555
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130D-0100-SA-S2-KP0-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130D-0100-SA-S2-KP0-35-N1 is a servo motor with a centering diameter of 130 mm and a frame size of D. This motor comes with a winding designation 0100, a winding resistance of 0.72 ohms, and a winding inductance of 1.79 mH. The coil in this motor generates the required electromagnetic field strength needed to rotate the shaft of the servo motor with enough power to attain a nominal speed of 1000 rotations per minute while producing a nominal rotational torque of 170 Nm.
With an onboard high-resolution single-turn encoder, the MAD130D-0100-SA-S2-KP0-35-N1 can easily rotate its shaft to the desired position with the help of increments. Whenever an increment is detected, this servo motor encoder sends a 5-volt square wave pulse, and in a single rotation, the motor encoder has a pulse resolution of 2048 increments. The encoder requires 7 to 12 volts DC to operate and will draw around 27 mA of current. For rotation in the opposite direction, the encoder generates square pulses with negative amplitudes, notifying the motor controller of the shaft rotation's direction.
Operators can mount this servo motor using either flange mounting or foot mounting options, depending on the application's requirements. The shaft on this servo is balanced with an entire key design and comes with a shaft seal ring to help prevent lubrication oil from spilling during operation. The N configuration of the bearing is the standard type bearing, allowing this motor to attain a maximum speed of 6000 rotations per minute while generating a maximum torque of 418 Nm.
