MAD130D-0100-SA-S2-BQ5-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911322437
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130D-0100-SA-S2-BQ5-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth MAD130D-0100-SA-S2-BQ5-35-N1 asynchronous housing motor encompasses standard ball bearings. This motor must be assembled by aligning the center line of its output shaft with the connection shaft of the related machine. The product must be fitted with transmission elements taking into consideration the permissible axial and radial forces. This device has a surface temperature of over 60 degrees C during and immediately after its operation. The unit must neither be disconnected nor opened in the pressurized state. It must be cooled down after operation before it is touched.
This motor is meant to be handled and mounted by observing the statutory regulations for accident prevention. The product portrays periodic operation with S6 operating mode. This device can be operated under unfavorable conditions. The unit has a service-friendly construction that helps to reduce maintenance. Its pressure must be released before it is dismounted. This motor must be retained in its original state without any structural changes. The product must be assembled, mounted, as well as installed properly for safe operation. This device may cause dangerous drive controller movements because of faulty control. The unit has a maximum allowed speed based on the bearing type. Its drive controller must be programmed before the commissioning process so that the motor performs the application-specific functions.
This motor must not be operated at a higher than the specified maximum speed. The product has a frame size based on the mechanical dimensions of its flange. This device is balanced with an entire key. The unit portrays Class F insulation. It has no labyrinth seal. This asynchronous housing motor has threaded centering holes on the cylindrical shaft end.
