MAD130D-0100-SA-M2-BG0-35-A1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911339686
Ask for AvailabilityThe Bosch Rexroth Indramat MAD130D-0100-SA-M2-BG0-35-A1 servo motor is part of the MAD IndraDyn A Motors series and features a frame size of 130 and frame length D. It is equipped with an axial fan for cooling, a multiturn absolute encoder EnDat2.1, and supports flange and foot mounting. The motor has IP65 protection, a rated speed of 1000 rpm, and operates within an ambient temperature range of 0 to 40 degrees Celsius.
Internal Product Review
The MAD130D-0100-SA-M2-BG0-35-A1 is a servo motor configured for flange and foot mounting. Axial fan cooling and IP65 protection support dependable operation in demanding industrial environments. The multiturn absolute EnDat2.1 encoder delivers precise feedback, making the unit an excellent motion solution at 1000 rpm.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130D-0100-SA-M2-BG0-35-A1 servo motor is manufactured by Bosch Rexroth Indramat and listed in the MAD IndraDyn A Motors series. It provides controlled torque and speed for positioning or velocity-regulated axes in industrial automation. By combining internal feedback with sealed construction, the unit is intended for continuous operation inside machinery that must maintain accurate motion while resisting airborne contaminants and sprayed fluids. This makes it suitable for production equipment that depends on stable servo response during repeated cycles.
Protection of electronic and mechanical parts is rated at IP65, meaning the housing is dust-tight and can withstand water jets. Cooling comes from an axial fan that moves air along the stator to discharge heat and keep torque output stable. The motor’s rated speed is 1000 rpm, and it may run in ambient temperatures from 0 to 40 °C without derating of Class F insulation materials. Position feedback is delivered by a multi-turn absolute encoder EnDat 2.1, allowing the controller to know shaft angle immediately after power-up and maintain closed-loop accuracy through successive revolutions. Power and signal connections exit on the B-side through a single connector, and vibration grade R supports general industrial operation.
The encoder generates 2048 sine-cosine periods per revolution, supporting fine interpolation for precise positioning and smooth speed control. Mechanical dimensions match frame size 130, and the D-length stator adds extra active iron for higher continuous torque without increasing diameter. The housing supports flange and foot mounting, so the motor can be secured to machine plates or base structures as needed. Output is delivered through a smooth shaft with a shaft seal, which helps keep lubricant in place while permitting direct coupling. Winding code 0100 identifies the electrical design, and the unit is supplied without a holding brake, so position holding during power loss must be provided by external clamping or drive torque.
