MAD130C-0200-SA-S2-LH1-35-R1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311749
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130C-0200-SA-S2-LH1-35-R1 is a servo motor with a rated torque of 13 Nm and a maximum speed of 4500 rpm. Manufactured by Bosch Rexroth Indramat, this motor is part of the MAD IndraDyn A Motors series and features a 130 mm frame size and rated power of 2.0 kW. It is naturally cooled.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130C-0200-SA-S2-LH1-35-R1 is an IP65 rated servo motor. An axial fan provides enhanced cooling. The shaft is plain and does not have a sealing ring. This motor works with a motor controller from Bosch. The controller supplies power to the motor and controls motor speed and shaft position. The motor transmits feedback to the controller about its speed and shaft position. Control algorithms factor in feedback when determining the change - if any – that is required in the controller output. This type of motor control is known are closed loop control, which relies on feedback for accurate control of motor parameters. The feedback sensor on the MAD130C-0200-SA-S2-LH1-35-R1 motor is a singleturn encoder with EnDat 2.1 interface that is rated for 2048 increments. An optional holding brake is installed on the asynchronous motor. This is an electrically-released brake with 80 Nm holding torque.
Voltage rating of the brake is 24 Volts DC. It draws 1.6 Amps current and the brake’s moment of inertia is 0.0017 kg m2. Connection time of the brake is 50 milliseconds and its disconnection time is 140 milliseconds. The primary function of the brake is to hold the shaft and prevent unwanted motion. The brake is designed to only release the shaft after it receives an electrical release signal from the motor controller. In this way, the brake helps to prevent accidents and injuries caused by unintentional or accidental motor shaft movement. The MAD130C-0200-SA-S2-LH1-35-R1 can be foot mounted or flange mounted. The power connector is located on the left side of the housing. The size of the power used for the motor must be smaller than 16 mm2. Nominal output torque of the unit is 110 Nm.
Frequently Asked Questions about MAD130C-0200-SA-S2-LH1-35-R1:
Q: What are MAD motor applications?
A: MAD motor applications include machine tools, packaging machines, and printing machines.
Q: What is the motor duty cycle?
A: The motor duty cycle is 10 minutes.
Q: What is the motor category?
A: MAD motors are asynchronous motors.
Q: Is operation without fan cooling allowed?
A: MAD motor operating without fan cooling is not allowed.
Q: What is the peak torque output?
A: The peak torque output is 252.9 Nm.
