MAD130C-0200-SA-S2-AH1-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323527
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130C-0200-SA-S2-AH1-05-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130C-0200-SA-S2-AH1-05-N1 asynchronous housing motor introduced by Bosch Rexroth cannot be operated without a drive controller. This motor features a 3K4 operating class according to DIN EN 60721-3-3 specifications. This product tends to encounter vibrations in the form of sinusoidal oscillations during its operation. The device is subject to axial and radial forces when it is in use. This unit features a shock load based on the maximum allowed acceleration in non-stationary use. It is important to carry out a compatibility test between new materials and the motor housing before operation.
This motor has an IP 65 protection class as per IEC 60259 specifications. The product supports a flange mounting style. This device is not designed for operation in potentially explosive areas. The unit meets UKCA requirements. Its housing can be repainted after covering its nameplate, safety labels, and open plug connectors. This motor must not be worked on when its surface is hot. The product should not be lifted by holding onto the output shaft or fan. This device comes with a holding brake to support its operation. The unit uses an axial fan for the cooling action. Its surface temperature crosses 60 degrees C at the time of operation.
This motor is meant to be used within the ambient conditions specified by the manufacturer. The product does not assure personnel safety using the holding brake. This device performs the application-specific functions only if its drive controller is commissioned before startup. The unit should be in standstill mode when its holding brake is clamped. It uses a single-turn absolute encoder for feedback. This asynchronous housing motor has no shaft sealing ring.
