MAD130C-0200-SA-S0-BQ0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911320486
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130C-0200-SA-S0-BQ0-35-V1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130C-0200-SA-S0-BQ0-35-V1 is a MAD series motor introduced by Bosch Rexroth Indramat. These motors have easy-to-service construction that eliminates frequent maintenance requirements. The machine has a key speed of 1500 rpm which is less than the rated speed of 2000 rpm due to derating. The maximum speed of the motor with reinforced bearings is 7500 rpm. The rated torque is 110 Nm and the rated output of the machine is 23 kW. The continuous torque of this model of asynchronous motor is 115 Nm. The motor has no holding brake, and the motor encoder is a single-turn absolute encoder with 512 periods and a signal of 1 Vss.
The interface of the encoder is I2C and the supply voltage is 8 V. The output shaft is balanced with a complete key and has no shaft sealing ring. The operating modes of the MAD130C-0200-SA-S0-BQ0-35-V1 are S1 represents continuous operation and S6 which represents a periodic operation. The duration of the cycle in S6 operating mode until the thermally steady-state condition is reached is 10 minutes whereas the thermal time constant is 50 minutes.
It has class F insulation as per DIN EN 60034-1 and the housing paint is jet back RAL 9005. These motors can be integrated with IndraDrive for intelligent drive solutions that offer high power density and open functions. The maximum torque that can be output at a peak current of 106.7 A is 253 Nm. The maximum output of the machine MAD130C-0200-SA-S0-BQ0-35-V1 is 47.2 kW. According to VDE 0298-4 and installation type B2 according to EN 60204-1, the power wire cross-section area is 19.3 mm2. For optimal operation, the ambient temperature ranges from 0 C to 40 C.
