Product Description:

The MAD130C-0200-SA-M0-AP0-35-V1 is a servo motor manufactured by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. It functions as the primary rotary actuator in automated lines that demand repeatable positioning, synchronized speed tracking, and fast torque transients. Integrated with IndraDrive controllers, the motor converts electrical commands into controlled motion for conveyors, pick-and-place gantries, and indexing stations while keeping velocity errors low in multi-axis installations. Its response characteristics suit axes that start, stop, and reverse direction frequently during normal production.

Rated for a top speed of 2000 rpm, the unit attains this performance with Winding Code 0200 and a 512-period feedback signal generated by its multi-turn absolute encoder. This feedback arrangement allows the drive to retain position information after power cycling and regulate motion during indexing moves. The encoder and power leads exit on the A-side, where a sealed connector simplifies wiring. Continuous duty is supported by an axial fan that forces air along the motor housing. When secured through flange and foot mounting interfaces, the enclosure maintains the IP65 ingress rating, preventing dust or water jets from reaching internal components. The motor is supplied without a holding brake, so external locking devices are required when power is removed.

Dynamic longevity is promoted by reinforced bearings that sustain loads while conforming to vibration grade R. Torque is delivered through a whole-key balanced shaft equipped with a shaft seal that retains lubricant and blocks contaminants. Electrical insulation is rated at Class F, allowing winding temperatures up to 155 °C during short-term overloads. The motor operates in ambient temperatures from 0–40 °C, matching typical machinery enclosures.