MAD130C-0150-SA-S2-AP0-35-N3
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321424
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130C-0150-SA-S2-AP0-35-N3 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130C-0150-SA-S2-AP0-35-N3 is 48.9 amperes servo motor that comes with a frame of size C and has a centering diameter of 130 mm making this servo motor a compact design option that weighs around 70 kg. This servo motor requires around 270 volts AC nominal to operate. This motor features around 3 pole pairs which are individually excited with the 3 phases of the input voltage with a frequency rating between 50 to 60 Hz.
The MAD130C-0150-SA-S2-AP0-35-N3 comes with a side Axial blower fan that helps this motor cool it's temperature if the motor gets too hot which is usually done with the help of the motor controller which sends the signal over to the motor blower to help dissipate heat within the motor enclosure. The motor requires around 460 volts AC to operate can draw up to 0.72 amperes of current and has an airflow rate of 1000 m3 per hour allowing this servo motor to cool its coil in an instant. This servo motor comes with two types of mounting styles, the foot mounting and the flange mounting option.
To help with tracking the shaft position and to rotate it towards the right angle and desired position, the MAD130C-0150-SA-S2-AP0-35-N3 comes with a single-turn absolute encoder that has a high resolution of 2048 increments. This encoder requires around 7 to 12 volts DC to operate drawing around 35 mA of current. For every increment, this encoder generates a 5-volt square wave signal which gets registered in the control module's memory calculating the necessary steps needed to reach a particular position. For opposite rotation, the encoder module generates inverted square wave signals with negative amplitudes.
