MAD130C-0150-SA-S0-AK0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310098
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130C-0150-SA-S0-AK0-05-N1 motor offers a rated output power of 1.5 kW, a rated torque of 9.55 Nm, a rated speed of 1500 rpm, and weighs approximately 9 kilograms. Part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it features natural cooling and an IP65 protection rating for reliable performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth produces the MAD130C-0150-SA-S0-AK0-05-N1 servo motor with a half-key balanced shaft, which is protected with a shaft seal. The model features a 2048-bit single-turn encoder that provides absolute positioning. The servo motor can be mounted on a flange, which makes it compatible with normal setups in industrial automation systems.
The MAD130C-0150-SA-S0-AK0-05-N1 motor's winding code is 0150, and its motor frame size is 130. The power connector of the MAD130C motor is located at side-A. The motor works with a power wire cross-section of 10.0 mm² that which can handle up to 93.3 A of current. At standstill position, the MAD130C-0150-SA-S0-AK0-05-N1 servo motor gives off 125 Nm of constant torque while consuming 51 A of current. The encoder type is single-turn absolute, which enables the execution of basic tracking in a single mechanical turn. The cycle is scheduled to operate at 44% task level S6 for a duration of ten minutes. At 20 °C, the torque constant is given as 3.10 Nm/A. It has a maximum speed of 1500 rpm and cools itself with an axial fan. There is no stopping brake in the product. Standard bearings are used, and the motor frame length is C. There are three sets of poles, and the vibration grade is R.
The MAD130C-0150-SA-S0-AK0-05-N1 servo motor has a thermal time constant of 30 minutes. There is a 20.5 nF discharge capacity rating for the motor that helps the unit work with electromagnetic fields. The design works with regulated uses where motion control parameters are linked to feedback precision and current handling. The product is compatible with control configurations that prioritize torque stability and input stability.
Frequently Asked Questions about MAD130C-0150-SA-S0-AK0-05-N1:
Q: How does MAD130C-0150-SA-S0-AK0-05-N1 achieve cooling?
A: The motor uses an axial fan that directs airflow over the frame for thermal regulation during extended cycles.
Q: Why is the thermal time constant 30.0 minutes in MAD130C-0150-SA-S0-AK0-05-N1?
A: This value defines the motor’s thermal response and allows better prediction of heat buildup in stop-and-go duty cycles.
Q: Does MAD130C-0150-SA-S0-AK0-05-N1 include a holding brake?
A: No, the motor is configured without a holding brake which allows for continuous rotation without braking resistance.
Q: Why does MAD130C-0150-SA-S0-AK0-05-N1 have a discharge capacity of 20.5 nF?
A: The discharge capacity ensures improved electromagnetic compatibility and reduces unwanted interference in control circuits.
Q: Do the standard bearings in MAD130C-0150-SA-S0-AK0-05-N1 affect durability?
A: Yes, standard bearings support consistent axial and radial loads while maintaining precision alignment under operational torque.
