MAD130C-0150-SA-M2-KH0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323253
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130C-0150-SA-M2-KH0-35-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Indramat Rexroth created MAD/MAF series asynchronous motors, and the MAD130C-0150-SA-M2-KH0-35-N1 is a type of motor that offers a rated speed of 1500 rpm with a key speed of 1000 rpm. The difference of 500 rpm is due to de-ratings, and with universal standard bearings, this machine can run up to 7500 rpm. The rated torque is 117 Nm, and the number of pole pairs is three. The motor protection class is IP 65, and as this machine has no holding brakes, the weight of the machine is 122 kg.
The discharge capacity of the component is 20.5 nF, whereas the duty cycle with periodic S6 operation is 10 minutes. The thermal time constant of this asynchronous motor MAD130C-0150-SA-M2-KH0-35-N1 is 50 minutes, and the torque constant is 3.1 Nm/A at 20 C. The continuous current at standstill is 51 A, and the continuous torque at stall is 125 Nm. The moment of inertia of the rotor is 0.108 kgm2, and the ambient temperature range in operation is 0 C to 40 C. The maximum torque of
At maximum speed, the maximum power output is 37.7 kW. The motor encoder is M2 which represents multi-turn absolute encoder with 2048 increments. To enhance the housing, it is painted by 2K epoxy resin coating commonly known as RAL 9005 by black primal based on epoxy polyamide resin in water. The motor frame shape is B35 that has permissible conditions for installation of IM B3 and IM B5 that setup represents foot installation feet pointing down and flange mounting on the drive end of the flange. This specific construction design offers either foot assembly or flange assembly according to EN 60034-7.
