MAD130C-0150-SA-M2-FP0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911313048
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130C-0150-SA-M2-FP0-05-N1 is a high-performance motor manufactured by Bosch Rexroth Indramat. As part of the MAD IndraDyn A Motors series, it features a power rating of 15 kW and a peak torque of 290 Nm. This motor incorporates surface cooling with air and an IP65 protection class. It supports a voltage class of 400V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MAD130C-0150-SA-M2-FP0-05-N1 asynchronous motor has no standalone operation support. This motor is always used with a compatible IndraDrive drive controller. The product is associated with the MAD family of such motors. This device has an easy-maintenance design. The unit’s rated speed is set at 1500 min-1. It is cooled using an axial fan fitted on the housing. This motor’s overall length is 640 mm, including its shaft and it has a mass of 124 kg.
The product-associated bearings have a long service life and high availability. This device produces low noise during the running action. The unit type and the machine construction must be coordinated with each other. It can withstand only up to 50 N of axial force. This motor supports form-locking torque transmission with constant direction. This motor’s machine elements are meant to be secured in the axial direction through its centering hole. The product installation is possible vertically and horizontally. This device’s performance is reduced outside the ambient conditions. The unit’s operation cannot be done at a temperature higher than 55 °C. It has a maximum power output at a voltage of 540 VDC.
This motor’s maximum allowed speed is based on its bearing type. The product’s continuous torque in standstill mode is the same as the rated torque in S1 mode when there is no derating. This device’s connections have to be made with the manufacturer’s cables as far as possible. The unit operation is not allowed without its fan. Its disposal is done as industrial waste with no negative impact on the surrounding environment.
Frequently Asked Questions about MAD130C-0150-SA-M2-FP0-05-N1:
Q: What kind of force does the bearing of the MAD130C-0150-SA-M2-FP0-05-N1 motor encounter?
A: The MAD130C-0150-SA-M2-FP0-05-N1 motor encounters axial forces.
Q: What standards do the eye bolts of the MAD130C-0150-SA-M2-FP0-05-N1 motor comply with?
A: The eye bolts of the MAD130C-0150-SA-M2-FP0-05-N1 motor comply with DIN 580 specifications.
Q: What should be done if the MAD130C-0150-SA-M2-FP0-05-N1 motor is kept unused for a long time?
A: The MAD130C-0150-SA-M2-FP0-05-N1 motor must be disconnected from the power supply when it is kept unused for a long time.
Q: Can the MAD130C-0150-SA-M2-FP0-05-N1 motor be used with the protective sleeve on its shaft?
A: No, the MAD130C-0150-SA-M2-FP0-05-N1 motor cannot be used with the protective sleeve on its shaft and the sleeve must be removed just before assembly.
Q: What precautions must be taken with the flange assembly of the MAD130C-0150-SA-M2-FP0-05-N1 motor?
A: The centering collar must not be clamped or jammed with the flange assembly of the MAD130C-0150-SA-M2-FP0-05-N1 motor.
