MAD130C-0150-SA-M2-BL0-35-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911319619
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130C-0150-SA-M2-BL0-35-V1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130C-0150-SA-M2-BL0-35-V1 from Rexroth's MAD series of servo motors is their flagship lineup known for generating high torque output along with high-speed rotation. This particular motor configuration comes with a torque output of 117 Nm of rotational torque at a rated speed of 1500 rpm. This motor comes with the V configuration of high-speed bearings that not only allows this servo to rotate at high speeds but also allows it to bear heavy loads thanks to the bearing's reinforced design. The maximum speed that this servo motor is able to achieve is 10,000 rpm.
This servo motor has very low inertia, allowing the motor to obtain high speeds and accelerate itself from zero to its top speed in a matter of seconds. The rotor inertia of this motor is 0.115 kgm². This servo motor comes with an M2 encoder configuration that offers high-resolution tracking of the shaft with a resolution of 2048 steps per rotation and is able to track multiple rotations for up to 4096 revolutions. To power this encoder, the MAD130C-0150-SA-M2-BL0-35-V1 requires a separate 5-volt DC supply to the encoder, with a minimum current requirement of 40 mA.
The MAD series of motors also comes with a blower configuration cooling fan that helps cool this servo motor during a high-speed, high-torque application as the coil may generate a lot of power, which may dissipate as heat. This servo motor has a power rating of 18.4 kW and an efficiency rating of 86.5%. This motor's overall efficient design allows it to generate up to 3.1 Nm of torque per ampere of current that it draws from the power supply and requires a nominal voltage of 179 volts AC to operate.
