Product Description:

The MAD130C-0100-SA-S2-DL0-05-N1 is a servo motor produced by Bosch Rexroth Indramat within the MAD IndraDyn A Motors series. Designed for closed-loop positioning and speed tasks, the motor converts drive-controller commands into precise mechanical rotation for conveyors, presses, and handling axes in automated lines. Its construction combines electronic feedback with electromechanical drive elements, making the unit a compact actuator for medium-torque, low-speed applications.

The motor reaches a rated speed of 1000 rpm, allowing controllers to match process demands without overspeeding the connected mechanics. Its housing is cooled by an axial fan, so airflow across the stator helps keep winding temperatures within permitted limits during continuous duty. Power and feedback conductors terminate in a sealed terminal box, which simplifies wiring and helps protect the connections from dust. Because the unit uses flange mounting, the frame seats directly against a machine wall or plate without additional brackets. Rotor position is captured by a single-turn absolute encoder EnDat2.1, giving the drive an unambiguous 360-degree position reference after power-on. The rotor runs on standard bearings, and vibration grade R keeps oscillations within typical industrial limits.

Electrical entry is on the right side, a layout that can keep cable bends short when the motor is installed in vertical panels or other tight spaces. At standstill, the shaft is held only by drive torque because the design is without a holding brake, so any load that requires passive holding must be clamped externally. The stator uses winding code 0100, which matches the electrical characteristics expected by compatible IndraDrive power stages. The motor has frame size 130 with frame length C. It also uses a balanced half-key shaft without a shaft seal for direct-coupled loads.