MAD130C-0100-SA-M2-BG0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323918
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
MAD130C-0100-SA-M2-BG0-05-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130C-0100-SA-M2-BG0-05-N1 asynchronous housing motor introduced by Bosch Rexroth is meant to be installed only in industrial machinery. This motor is one of the several air-cooled offerings in the MAD series by the manufacturer. The product features a frame size based on the mechanical dimensions of its flange on its output side. This device is CE Certified and cUL Recognized. The unit also meets UKCA requirements. It is subject to a high-voltage test before delivery.
This motor has a type plate with its type designation and key technical details on its housing. The product must be protected against corrosion and moisture. This device can be installed horizontally or vertically. The unit encounters axial and radial forces on the output shaft and bearings when it is operated. It should at no time be operated without a fan. This motor has two temperature sensors in its windings for protection against overload. The product features a pre-warning temperature of 110 degrees C. This device encompasses a multi-turn absolute encoder with an EnDat 2.1 interface. The unit supports the fitting of clamping elements on its output shaft. It has a shaft sealing ring around the mounting flange.
This motor deploys a flange mounting style. The product is made of environment-friendly materials that do not have a negative impact on the environment. This device comprises bearings with low-noise running and suitability for high speeds. The unit type must be coordinated with the machine type to ensure that the specified load limits are not exceeded. This asynchronous motor must not be subject to impacts on the shaft end.
