Product Description:

Bosch Rexroth Indramat builds the MAD130C-0100-SA-M2-AP1-05-N1 within its MAD IndraDyn A Motors series. The unit is a servo motor intended for positioning or feed axes that demand high continuous torque in industrial automation. By combining electronic commutation with a high-resolution feedback device, it delivers precise velocity and angle control to machine tools, packaging systems, and handling stations. It is suited to applications that need controlled acceleration, steady low-speed operation, and consistent position feedback over repeated cycles.

With a rated speed of 1000 rpm, the motor is suited to axes where torque density matters more than high top speed. Its flange mount seats the frame firmly to the machine structure, and an integrated axial fan moves cooling air through the housing so the windings stay within insulation class F. The housing is sealed to IP65, helping protect internal components from dust and low-pressure coolant spray. Position feedback is supplied by a multi-turn absolute encoder EnDat 2.1 with 2048 signal periods for closed-loop control. The electrically actuated brake provides 80 Nm of holding torque when power is removed. Winding code 0100 matches the motor to standard IndraDrive current ranges, and vibration grade R supports smooth operation across the stated ambient temperature range.

Power and feedback cables exit on the A-side through a sealed connector, which can simplify routing when the connection point must remain on one end of the motor. The brake is electrically released, so it holds the shaft at rest and disengages when DC power is applied. The motor uses a whole-key balanced shaft with a shaft seal, and it is equipped with standard bearings for general industrial duty. Frame size 130 with frame length C provides the iron volume needed for thermal capacity and stable torque production. This arrangement supports installations that require a sealed shaft interface, secure holding at standstill, and a fixed cable exit direction.