MAD130B-0200-SA-S2-AH0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911319739
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130B-0200-SA-S2-AH0-05-N1 synchronous motor delivers a peak torque of 187.2 Nm for high-performance tasks. It operates at a top speed of 2,000 rpm for precise automation control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130B-0200-SA-S2-AH0-05-N1 is a permanent magnet synchronous motor manufactured by Bosch Rexroth. It is in the MAD line, which is made for automation tasks that need to be very precise. The motor is designed to consistently deliver the torque and power needed by demanding industrial robotic production systems.
The MAD130B-0200-SA-S2-AH0-05-N1 synchronous motor can handle 43.0 A of electricity and 16.80 kW of power. The motor has a maximum speed of 2,000 times per minute and a key speed of 1,500 times per minute. It can put out a maximum of 34.44 kW of power and 80.8 A of current at its peak. The most torque the unit can make is 187.2 Nm. The constant current is 44.5 A, and the constant torque is 85.0 Nm when the motor is not moving. It was found that the torque constant is 2.47 Nm/A at 20 °C. The rate at which the turning responds to temperature changes is set by the thermal time constant, which is 20.0 minutes. In the S6 44% duty cycle rating, the cycle lasts for 10 minutes, which is in line with conditions of dynamic load. It is the number of pole pairs that defines the ratio of electrical frequency to speed.
When it comes to internal electromagnetic compatibility, the part's discharge limit is 16.1 nF. The motor is built with a stator and rotor structure that keeps the temperature stable even when it is loaded and unloaded many times. For uses that need stable torque control and consistent cycle times, the MAD130B-0200-SA-S2-AH0-05-N1 synchronous motor is a good choice. Because the motor is mechanically designed, the current flows evenly, which keeps the stress on the windings to a minimum.
Frequently Asked Questions about MAD130B-0200-SA-S2-AH0-05-N1:
Q: Why does MAD130B-0200-SA-S2-AH0-05-N1 have 3 pole pairs?
A: The 3 pole pairs provide an optimal speed-to-frequency ratio. This ensures precise torque control and enhances synchronization in servo drive systems.
Q: How does MAD130B-0200-SA-S2-AH0-05-N1 manage thermal load?
A: The thermal time constant of 20.0 minutes enables consistent heat dissipation. It stabilizes winding temperature during cyclic operations.
Q: Does MAD130B-0200-SA-S2-AH0-05-N1 support high-speed torque control?
A: Yes, with a rated speed of 2,000 1/min and key speed of 1,500 1/min, the motor ensures regulated high-speed performance under varying loads.
Q: Why does MAD130B-0200-SA-S2-AH0-05-N1 have 85 Nm standstill torque?
A: This enables the motor to hold position under static load. It supports systems needing constant position retention without motion.
Q: Do MAD130B-0200-SA-S2-AH0-05-N1’s 44.5 A standstill current affect performance?
A: The steady current at standstill ensures a consistent electromagnetic force. It maintains stable torque without thermal imbalance during low-speed cycles.
