MAD130B-0200-SA-S2-AG0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911314824
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130B-0200-SA-S2-AG0-05-N1 is a self-cooled servomotor with air cooling and a rated power of 2.0 kW. Manufactured by Bosch Rexroth Indramat as part of the MAD IndraDyn A Motors series, it features IP65 protection and an encoder type of S2 (Sine/Cosine 2048 PPR). It delivers a peak torque of up to 19 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Indramat manufactures the MAD130B-0200-SA-S2-AG0-05-N1 synchronous motor with an insulated F category for safety and the noise level created by the device is measured 70 decibels by microphone at a 1m distance. The motor is equipped with an 11 V EnDat2.1 interface encoder, that is single-turn and with 2048 incremental configuration.
The MAD130B-0200-SA-S2-AG0-05-N1 synchronous motor has an angular inertia of 0.084 kg·m² and weighs approx. 100 kg. A thermal dissipation time of 45 minutes applies to this device and in S6 operating mode its efficiency is 44% with a duty cycle time of 10 minutes. The MAD130B synchronous motor draws 80.7 A of peak current while the standstill current is 44.5 A. The motor gets cooled by an axial fan set to extrude out the air from the enclosure, the fan needs up to 208 VA of power while draws 0.2 to 0.25 A of current and provide an airflow that reaches 588.58 CFM. For stable performance the MAD130B motor uses 3 pole pairs and 1 A of electricity yields 2.15 Nm of torque. On the motor’s plain shaft, an imbedded sealing ring helps to protect against greases and oils while this MAD motor also comes without holding brakes, though an extra 24 VDC holding brake can be fitted if required.
The MAD130B-0200-SA-S2-AG0-05-N1 synchronous motor can reach its maximum speed of 7500 rotations/minute when fitted with normal industrial bearings. It consumes 16800 W of rated power and uses 43 A of continuous current. The MAD130B synchronous motor is installed through a flange-based mounting and ensures a high level of protection from any dust or moisture patch larger than 1 mm. It provides a rated rotational torque of 0.080 kNm.
Frequently Asked Questions about MAD130B-0200-SA-S2-AG0-05-N1:
Q: How does the EnDat2.1 encoder enhance motion accuracy?
A: The single-turn 11 V EnDat2.1 encoder with 2048 incremental pulses allows fine-position detection and speed feedback. This improves control loop precision in dynamic applications.
Q: How does 0.084 kg·m² angular inertia impact performance?
A: This angular inertia provides smoother rotational motion under load changes. It minimizes speed fluctuations during rapid acceleration or deceleration phases.
Q: Why is a 16.1 nF discharge energy rating important?
A: It indicates the motor’s ability to absorb transient voltages safely. This helps in protecting connected drive electronics during system shutdown or fault events.
Q: How does the axial fan contribute to operational stability?
A: The axial fan circulates up to 1000 m³/h airflow to manage heat. This ensures thermal balance during high-speed or intermittent duty cycles.
Q: Can the MAD130B-0200-SA-S2-AG0-05-N1 motor be used without the optional brake?
A: Yes, it comes without a holding brake by default. The optional 24 VDC brake can be added if load-holding is needed when the motor is powered off.
