MAD130B-0200-SA-S0-AH0-05-V1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911314822
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD130B-0200-SA-S0-AH0-05-V1, part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, is an AC servo motor with a frame size of 130mm. It has a rated output of 2.0 kW and operates at a rated speed of 1500 rpm. The motor features natural cooling, an absolute encoder, and an IP65 enclosure rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Indramat produces the MAD130B-0200-SA-S0-AH0-05-V1 for machines that require a low amount of inertia and high speed. The motor can deliver a torque of 80 Nm and functions at 2000 r/minute with an energy consumption of 16.8 kW. There is no sealing ring on the shaft and no braking feature with this MAD130B motor to support high shaft speeds with little resistant force in the system.
The reinforced bearings in the MAD130B-0200-SA-S0-AH0-05-V1 motor make it capable of reaching 7500 r/minute, without overload. The motor delivers its maximum torque of 187 Nm and can handle a maximum current of up to 80.7 A, pulling 43 A of normal continuous current. The MAD130B motor’s thermal value of 45 minutes allows steady performance while operating and at 20°C the motor have an observed torque potential of 2.15 Nm/A. An axial fan with blowing configuration is used for thermal management. The fan runs with power from a three-phase voltage input, either 400V ±15% or 480V ±10%, at 50/60 Hz. It consumes from 139 to 208 VA and sends 1000 m³/h of air through itself. In the MAD130B motor only flange mounting is allowed and the vibration is grade R with IP65 protection from dust and light water sprinkles.
The MAD130B-0200-SA-S0-AH0-05-V1 motor’s electrical system uses an absolute encoder with 512 increments and is powered by 8 V. The encoder comes with I²C interface to transfer information as a sinusoidal signal of 1 Vss to give accurate feedback on the position. The electrical connector is attached to the A-side of the motor to promote ease of setup within systems. The MAD130B motor provide 5-minute duty cycle when operating on S6 mode.
Frequently Asked Questions about MAD130B-0200-SA-S0-AH0-05-V1:
Q: How does the lack of a sealing ring affect the MAD130B-0200-SA-S0-AH0-05-V1 motor?
A: It reduces shaft friction, making the motor more suitable for low-resistance, high-speed motion control setups where sealing isn't critical.
Q: What advantage do reinforced bearings offer in the MAD130B-0200-SA-S0-AH0-05-V1 motor?
A: Reinforced bearings support stable operation at up to 7500 r/min, ensuring mechanical durability during continuous load conditions.
Q: What role does the sinusoidal 1 Vss signal play in the encoder system of MAD130B-0200-SA-S0-AH0-05-V1?
A: It allows smooth, high-resolution feedback for dynamic motion adjustments, which is crucial in synchronized automation tasks.
Q: What is the benefit of the 512-increment absolute encoder in MAD130B-0200-SA-S0-AH0-05-V1?
A: It delivers precise position tracking without requiring recalibration after power loss, boosting system efficiency in automated operations.
Q: Why does the motor’s fan accept both 400V and 480V inputs?
A: This allows compatibility with varied power infrastructure globally, supporting systems that run at 50 or 60 Hz frequencies.
