MAD130B-0150-SA-S2-KP0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321481
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130B-0150-SA-S2-KP0-05-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130B-0150-SA-S2-KP0-05-N1 from Rexroth Indramat is an 80 Nm AC servo motor that features a multiturn encoder with a resolution of 2048 steps per rotation and can rotate 4096 times. This servo has a nominal speed rating of 1500 rpm and the maximum speed of this servo motor is 7500 rpm while generating a torque of 80 Nm at nominal speed and 193 Nm at the maximum speed. In the locked rotor mode, this servo motor has a torque rating of 88 Nm while drawing a continuous current of 34.5 Amperes, which is 2 Amperes additional to the nominal current rating of 32.3 Amperes.
This motor has a winding type of 0150 and has a winding resistance of 0.23 ohms which ensures minimal power loss to the motor but may get hot over time. To ensure this motor remains cool in all modes of operation, the MAD130B-0150-SA-S2-KP0-05-N1 offers an axial blower fan as the cooling option. The blower fan unit has a cooling flow rate of 1000 m³ per hour and pulls air from the rear of the motor, cooling the internals of the servo and pushing the hot air out the front end of the servo motor.
Even with the inclusion of an axial blower fan, this servo motor comes with a low noise rating of 75 dB which ensures a low noise operation while keeping the industrial noise standard in consideration. To make sure this servo motor does not get affected by environmental factors such as dust and moisture, the MAD130B-0150-SA-S2-KP0-05-N1 comes with an IP 65 Ingress protection rating that ensures solid dust particles of up to 2 mm cannot enter the motor enclosure.
