MAD130B-0150-SA-S2-AG1-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911323272
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD130B-0150-SA-S2-AG1-05-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD130B-0150-SA-S2-AG1-05-N1 asynchronous housing motor designed and manufactured by Bosch Rexroth uses an axial fan for the cooling action. This motor and its fan have to be checked for proper functioning after every 1,000 operating hours. The product is meant to undergo maintenance only after the drive controller is turned off. This device can be installed vertically with the output shaft facing upward or downward. The unit encompasses an electrically-releasing holding brake. Its fan housing has a high temperature after the motor operation.
This motor uses an encoder with 2,048 signal periods for its feedback. The product supports an admissible axial load of 30 N. This device allows the attachment of clamping sets and pressure sleeves on its output shaft. The unit incorporates a fixed position for the encoder connection. It is one of the various motors belonging to the MAD product group. This motor can be operated in moist rooms because of the shaft sealing. The product features reduced wear and tear of the rubbing seal if the sealing point is clean. This device has a voltage rating of 24 VDC +/-5% for the holding brake. The unit incorporates bearings with low-noise running and suitability for high speeds. Its radial shaft sealing ring functions like a friction seal.
This motor encounters load on the bearings and output shaft during operation. The product has an allowed radial force based on the bearing service life, force action point, and arithmetically averaged speed. This device must never be operated at beyond the specified maximum speed. The unit may have a thermally induced axial force because of a change in length when bevel gear pinions are fitted. Its bearings have a reduced lifespan if the ambient operating conditions are not met.
