MAD100D-0150-SA-C0-BP0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911335733
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD100D-0150-SA-C0-BP0-05-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD100D-0150-SA-C0-BP0-05-N1 is produced by Bosch Rexroth Indramat. It is an asynchronous box motor with a squirrel cage rotor, that is designed for use with IndraDyn A drives. It is part of the MAD series of air-cooled motors and has a motor length of D. The unit is equipped with an incremental encoder, which has a supply voltage of 5V and a signal of 1 Vss. The electrical connector on the unit is B-side, while its output shaft is balanced with key and has a sealing ring. There isn?t a holding brake on this unit. It makes use of standard deep-groove bearings, which have a long service life. The vibration severity level of the motor is standard in accordance with the DIN ISO 2373 standard.
The air current of the integrated axial fan is blowing. The unit has a motor frame size of 100. It has a typical working rated speed of 1500 revolutions per minute. The mechanical power output at that speed is 9.3 kilowatts while the available torque that the unit can output at its rated speed is 59 Newton meters. The key speed of the unit is 1000 rpm, while its maximum speed is 9000 rpm. The motor has 3 pole pairs and its moment of inertia, without the bearing and encoder included, is 0.0392 kgm2.
The MAD100D-0150-SA-C0-BP0-05-N1 has a mass of 72 kilograms with the fan included. It belongs to the F insulation class as per the DIN EN 600034-1 specs and the IP 65 motor protection class. The power wire of the unit has a cross-sectional area of 4 mm2. The recommended ambient temperature range for operation to avoid derating is between 0 and 40 degrees Celsius.
