MAD100C-0250-SA-S2-BH1-35-N4
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911336514
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAD100C-0250-SA-S2-BH1-35-N4 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Rexroth Bosch Group being the top manufacturers of electrical goods, manufactures a variety of synchronous and asynchronous motors among which MAD100C-0250-SA-S2-BH1-35-N4 is one. The MAD100C-0250-SA-S2-BH1-35-N4 falls under the category of asynchronous motors as it can start by itself.
The size of this motor is 100 and the winding is 0250. The length is C and the mass value without holding the brake but with a fan is 59 kg. As this motor is equipped with an absolute encoder, it can measure the absolute position of the rotating shaft at any time. This encoder is designed and certified to operate safely in environments where there is a risk of explosion such as chemical plants, oil refineries, and mining operations. The electrical connection can be established with the connector that is present on the B side of the motor. The cooling system is equipped with axial fans that are responsible for keeping the system cool during operation.
The motor has a plain shaft that has no shaft sealing ring. However, holding breaks are present that take 90 ms for disconnection and 30 ms for connection. The mass of these holding brakes is 1.6 kg and the voltage of DC 24 +- 10% V is required for connection. The duty cycle time of this MAD100C is 10 minutes and the thermal time constant is 30 minutes. The power wire cross section is 4 mm2 and the ambient temperature in operation ranges between 0 ℃ to 40 ℃. The rated current consumption is 27.8 A but this value can reach up to 44.9 A as its maximum current consumption value of MAD100C. The motor can generate a maximum output of 21.5 kW and the maximum speed at which the motor can rotate with bearings is 6300 revolutions per minute.
