MAD100C-0200-SA-S0-BG0-05-N2
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911317490
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD100C-0200-SA-S0-BG0-05-N2 actuator is a rotary electric device featuring a torque rating of 200 Nm, an enclosure rated at IP67, ISO 5211 flange mounting, and a weight of approximately 17 kilograms. Part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it operates within temperatures of -20°C to +70°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD100C-0200-SA-S0-BG0-05-N2 asynchronous servomotor provided by Bosch Rexroth Indramat operates with only an IndraDrive drive controller from its manufacturer. This motor deploys a surface cooling action. The product comes connected with a fan connected to the housing. This device is suitable for all rotary driving tasks. The unit has a reduced maintenance frequency because of its easy-to-service construction. Its inappropriate use can lead to property damage or injury to personnel. This motor’s related safety instructions must be read and understood before it is used.
This product cannot be subject to structural changes. This device-related pickup action cannot be achieved by holding the shaft. The unit might require additional sensors and actuators to be activated to control and monitor it. It is said to be inappropriately used if the operating conditions are outside the ambient conditions. This motor needs nearly two and a half hours for cooling after the switching off action. The product’s handling and mounting should be done using tools and lifting equipment in the correct manner. This device and the supporting fan depict an IP 65 protection rating.
This motor’s torque constant is the ratio of its torque increase to the torque-forming current. The product has a continuous current in standstill mode until the key speed is attained. This device is transported plus stored only horizontally. The unit supported a smooth and plain output shaft. Its protective sleeves on the connectors and housing must be removed just before its assembly. This asynchronous servomotor has no additional threaded holes on its long side. This product is available from Wake Industrial with a 1-year warranty.
Frequently Asked Questions about MAD100C-0200-SA-S0-BG0-05-N2:
Q: What happens when the MAD100C-0200-SA-S0-BG0-05-N2 motor is tipped or dropped?
A: The MAD100C-0200-SA-S0-BG0-05-N2 motor is prone to damage when it is tipped or dropped.
Q: How should the lifting of the MAD100C-0200-SA-S0-BG0-05-N2 motor be done?
A: The lifting of the MAD100C-0200-SA-S0-BG0-05-N2 motor should be done using the eye bolts on its housing.
Q: How many turns does the encoder of the MAD100C-0200-SA-S0-BG0-05-N2 have?
A: The encoder of the MAD100C-0200-SA-S0-BG0-05-N2 has a single turn.
Q: What type of temperature monitoring sensor does the MAD100C-0200-SA-S0-BG0-05-N2 motor have?
A: The MAD100C-0200-SA-S0-BG0-05-N2 motor has a KTY84-130 temperature monitoring sensor.
Q: What check must be done for the external temperature measurement of the MAD100C-0200-SA-S0-BG0-05-N2 motor?
A: The polarity of the temperature monitoring sensor must be correct for the external temperature measurement of the MAD100C-0200-SA-S0-BG0-05-N2 motor.
