MAD100C-0150-SA-S2-AP1-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311166
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The MAD100C-0150-SA-S2-AP1-05-N1 AC servo motor features a rated output of 1.5 kW, a rated torque of 4.77 Nm, a shaft diameter of 15 mm, and IP65 protection class. Part of the MAD IndraDyn A Motors series by Bosch Rexroth Indramat, it operates at a rated speed of 3000 rpm and employs a self-cooled system.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAD100C-0150-SA-S2-AP1-05-N1 Asynchronous servo motor is manufactured by Bosch Rexroth Indramat for controlled motion applications in factory automation. The motor is 100 mm in diameter and has a flange mounting style. A sealed, whole-key balanced shaft is part of this servo motor, and it mechanically works with any normal drive setup.
The MAD100C-0150-SA-S2-AP1-05-N1 asynchronous servo motor has a continuous torque of 48.0 Nm and a stall torque of 50.0 Nm. The servo motor runs on a current rating of 19.7 A and has a holding torque of 24 Nm. At 1500 rpm, both the base and rated speeds are equal. The motor can handle currents as high as 39.0 A and as low as 20.2 A. The bearing is capable of withstanding speeds of up to 9000 revolutions per minute, with a critical speed of 1000 revolutions per minute. Additionally, the winding code for this motor is 0150, and it is classified as a size C motor. An axial fan that can run continuously is utilized for cooling. A shaft seal is incorporated into the design of this sort of shaft to enhance protection and reliability. The A-side connector system serves as the basis for the connection type. With an electrical release of the retaining brake, the vibration grade is marked as R.
The MAD100C-0150-SA-S2-AP1-05-N1 servo motor can produce a total of 15.38 kW of power, with a constant output of 7.50 kW. In order to maintain operational consistency throughout variable load cycles, the motor uses a conventional bearing type. Based on the EnDat 2.1 protocol, the encoder type is a single-turn absolute encoder. Its electronic holding brake and axial fan cooling make it compatible with systems that drive motion with accuracy.
Frequently Asked Questions about MAD100C-0150-SA-S2-AP1-05-N1:
Q: Why does MAD100C-0150-SA-S2-AP1-05-N1 have a holding brake?
A: The electrically released holding brake ensures secure load holding during motor shutdown. It prevents back-driving in vertical or suspended load applications.
Q: Do MAD100C-0150-SA-S2-AP1-05-N1 motors support 9000 rpm?
A: Yes, the motor supports 9000 rpm peak speed with bearings. This enables high-speed motion in demanding operational cycles.
Q: Does MAD100C-0150-SA-S2-AP1-05-N1 use the connector type?
A: Yes, it uses a connector interface for electrical connection. This setup simplifies cable management and allows secure integration.
Q: Why is MAD100C-0150-SA-S2-AP1-05-N1 rated 7.50 kW?
A: The 7.50 kW continuous power rating supports sustained mechanical output. It balances torque and speed under stable thermal management.
Q: How does MAD100C-0150-SA-S2-AP1-05-N1 manage vibration?
A: The vibration grade R ensures controlled mechanical resonance. It improves lifespan and performance consistency in dynamic load environments.
