MAD100C-0150-SA-M2-EH0-05-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911335309
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
MAD100C-0150-SA-M2-EH0-05-N1 Spindle Motor manufactured by Bosch Rexroth Indramat. This motor has a cooling mode with an Axail Fan, Blowing and a Singleturn Absolute, 2048 increments encoder. It also has a mounting style of Flange and a Standard bearing.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
MAD100C-0150-SA-M2-EH0-05-N1 is the servo motor of the Rexroth IndraDyn series that is introduced by Rexroth Boch Group which is well-known for its high-end manufacturing of controllers and drive controllers.
It has a multi-turn absolute encoder which means that it can measure both the position and the number of complete revolutions of a shaft. For each complete revolution, the encoder produces 2048 increments to ensure accurate determination of the position. However, the shaft is plain with no shaft sealing ring and the holding brakes are also absent. It has standard bearings to reduce friction, support loads and enable movement and R depicts the vibration severity of this motor.
The length of the motor is 100, the winding is 0150 and the length is C. The overall mass of the motor excluding the mass of the holding brakes but including the mass of the fan is 59 kg and the suitable ambient temperature when the motor is in operation can be any from 0 ℃ to 40 ℃. As the value for the moment of inertia of this motor is 0.0284 kgm2, which is quite low, the motor doesn’t require high torque in order to accelerate and decelerate. The power wire cross-section is 1.5 mm2 and the number of pole pairs is 3. The sound pressure level at the distance of 1 m and 4 kHz Pulse Width Modulation (PWM) is 70 (+3) dB (A) and it can generate a maximum output of 10.6 kW. The motor is certified with IP65 motor protection class that reflects that it can bear the dust and small jet sprays of the water. The F insulation class depicts that the insulation material of the motor can bear the temperature of 155 ℃.
